Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Eric Nicolai

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Now, removeRemove any visible debris that may be blocking the CHP Mode Switch.
[* black] Now, removeRemove any visible debris that may be blocking the CHP Mode Switch.
[* black] Using the Q-tip '''gently''' wipe away any dust, dirt or residue, in and around the switch.
[* black] Once you are sure the switch is clean, test it gently by sliding it back and forth between the 'C', the 'H', and the 'P'. If the switch is clean there should be very little resistance and the switch should glide smoothly from one mode to the next.