| - | [* icon_caution] Do not completely lift the circuit board off the camera. The circuit board is attached to the top of the camera by a soldered ribbon cable. Lifting the main circuit board off the camera will break these soldering points. |
|---|
| - | [* black] Gently lift the bottom of the main circuit board, the side without the soldered attachment points, like a hinge. |
|---|
| - | [* red] Locate the white ribbon cable attached to the underside of the main circuit board. |
|---|
| - | [* red] Gently remove the white ribbon cable from the connector. |
|---|
| + | [* icon_note] Do not completely remove the main circuit board from the camera. A soldered ribbon cable still attaches the board to the camera. Complete removal would break the soldering points. |
|---|
| + | [* black] In a hinge-like motion, gently lift the bottom of the main circuit board, which is the side without the soldering points. |
|---|
| + | [* red] Gently detach the white ribbon cable from the underside of the main circuit board. |
|---|