Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #2

Modifié par Josh

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Pulling the front case off, requires applying enough strength in the right areas.
[* black] The front case snaps into place in three places:
[* blackgreen] At the top and bottom of the battery side (opposite of side pictured) of the case.
[* blackblue] Right in the middle of the DC-in side (side pictured) of the case.
[* blackviolet] Top of the camera, to the left of the power button.
[* black] By slidingOnce those places are disconnected, the front case away from the back case in the areas outlined above, it'llwill pop right off.
[* icon_note] The camera in thesethe first two pictures is upside down. This is the best position to place your thumbs to remove the case.
[* blackgreen] At the top and bottom of the battery side (opposite of side pictured) of the case.
[* blackblue] Right in the middle of the DC-in side (side pictured) of the case.
[* blackviolet] Top of the camera, to the left of the power button.
[* black] By slidingOnce those places are disconnected, the front case away from the back case in the areas outlined above, it'llwill pop right off.
[* icon_note] The camera in thesethe first two pictures is upside down. This is the best position to place your thumbs to remove the case.

Image 3

Aucune image précédente

Ajouté