Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #2

Modifié par Josh

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Pulling the front case off, requires applying enough strength in the right areas.
[* black] The front case snaps into place in three places:
[* black] At the top and bottom of the battery side (opposite of side pictured) of the case.
[* black] Right in the middle of the DC-in side (side pictured) of the case.
[* black] Top of the camera, to the left of the power button.
[* black] By sliding the front case away from the back case in the areas outlined above, it'll pop right off.
[*
icon_note] The camera in these pictures on this guide areis upside down. This is the best position to place your thumbs to remove the case.
[* black] By sliding the front case away from the back case in the areas outlined above, it'll pop right off.
[*
icon_note] The camera in these pictures on this guide areis upside down. This is the best position to place your thumbs to remove the case.