Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Rachel

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] On the side parallel toopposite the rubber cover, open the battery casing by pushing slightly in the direction of the arrow.
[* red] Note: you may see a memory card. If so, remove the card by pushing down on it until you hear a click, and it will come loose so you can gently pull it out.
[* black] On the side parallel toopposite the rubber cover, open the battery casing by pushing slightly in the direction of the arrow.
[* red] Note: you may see a memory card. If so, remove the card by pushing down on it until you hear a click, and it will come loose so you can gently pull it out.
[* black] Using the Phillips head screwdriver, remove the two screws on either side of the memory card, and set them aside.