Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Patricia Hubbert

Modification approuvée par Patricia Hubbert

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* blue] While pullingblack] Pull the grey tab towards the back of the camera, liftcamera. Lift the black section of the battery cover upup, exposing the battery slots.
[* redblack] Use thethe'' Phillips head screwdriverscrewdriver'', rotating counter clockwise to remove the two screws on either side of the battery slots and set themslots. Set the screws aside.
[* blackicon_caution] When reassembling the camera, make surecamera it is important that the grey partholes for the screws on either side of the battery cover is underneathslots align properly with the'' interior ''of the two halves ofcamera body.
[* icon_caution] When reassembling
the camera casing. Thethe black section of the battery cover should fitmust lie flat over the empty space where the batteries gobattery slots and the holes for the screws should line up with the holesbe held in place by the casing. Yougrey tab. You may needhave to pull the green part of the inside''inside'' of the camera away from the grey tab in order to move the battery cover into place.
[* blue] While pullingblack] Pull the grey tab towards the back of the camera, liftcamera. Lift the black section of the battery cover upup, exposing the battery slots.
[* redblack] Use thethe'' Phillips head screwdriverscrewdriver'', rotating counter clockwise to remove the two screws on either side of the battery slots and set themslots. Set the screws aside.
[* blackicon_caution] When reassembling the camera, make surecamera it is important that the grey partholes for the screws on either side of the battery cover is underneathslots align properly with the'' interior ''of the two halves ofcamera body.
[* icon_caution] When reassembling
the camera casing. Thethe black section of the battery cover should fitmust lie flat over the empty space where the batteries gobattery slots and the holes for the screws should line up with the holesbe held in place by the casing. Yougrey tab. You may needhave to pull the green part of the inside''inside'' of the camera away from the grey tab in order to move the battery cover into place.