| - | [* icon_caution] Caution: Make sure the clippers are unplugged from the wall before beginning teardown. |
|---|
| - | [* red] Using the Philips screwdriver unscrew the two housing cover screws to expose the inner parts. |
|---|
| - | [* yellow] Next, using the Philips screwdriver, unscrew the two mounting screws indicated, holding down the ***razor***. |
|---|
| - | [* icon_reminder] Be sure to keep track of appropriate washers with each screw |
|---|
| - | [* orange] Using the Philips screwdriver, remove the switch installment screw indicated. |
|---|
| + | [* icon_caution] Caution: Make sure the clippers are unplugged from any ***electrical*** outlets before beginning teardown. |
|---|
| + | [* red] Using the Philips screwdriver, unscrew the two housing cover screws indicated to expose the inner parts. |
|---|
| + | [* yellow] using the Philips screwdriver, unscrew the two mounting screws indicated, holding down the ***Coil Assembly***. |
|---|
| + | [* icon_reminder] keep track of appropriate washers with each screw |
|---|
| + | [* orange] Using the Philips screwdriver, remove the ***switch installment screw ***indicated. |
|---|