Modifications apportées à l'étape #4
Modifié par Marcus Thomas —
Modification approuvée par Marcus Thomas
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Locate the Motor Core and follow it's power wires to the Attached power cord. |
|---|---|
| - | [* icon_caution] Black being {Negative} goes with the Black wire, Red being {Positive} goes with white cord connected to the Attached power cord. |
| - | [* black] Next: unravel the {Positive,Negative} wire from the motor that connects to the wire attached cord. |
| - | [* black] Strip the ends of each wire with the wire strippers approximately 1-2cm down to reveal enough wire to twist back together with new motor's wires . |
| + | [* yellow] Next, using the wire cutters, cut the {Positive & Negative} wires leading from the ***Coil Assembly*** to the ***wire attached cord*** approximately half way between the two ends of both wires. |
| + | [* icon_note] Black being {Negative} goes with the Black wire, Red being {Positive} goes with the white cord connected to the ***Attached power cord***. |
| + | [* red] Strip the ends of each wire with the wire strippers approximately 1-2cm down to reveal enough wire to twist back together with new motor's wires . |
| [* icon_reminder] Be sure to keep track of the corresponding wires and their locations to match when the new motor is inserted. |