Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par Luke Soules

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

+[* black] Remove the following 16 screws, moving cables as necessary:
+ [* red] One 4.4 mm black Phillips screw to the right of the RAM slot.
+ [* orange] Nine 4.7 mm silver T6 Torx screws securing the logic board to the lower case.
+ [* yellow] One 6.2 mm black T6 Torx screw on the right side of the left fan.
+ [* green] Five 9.4 mm silver T6 Torx screws securing the left and right fans.