Aller au contenu principal

Modifications apportées à l'étape #11

Modifié par iRobot

Validation en attente


Lignes de l'étape

+[* black] Peel up the iSight and inverter board cables from above the left fan.
+[* black] Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the fan up.
+[* black] Place the fan above the Airport card. It is not necessary to entirely remove the fan from the computer.

Image 1

Aucune image précédente