Modifications apportées à l'étape #14
Modifié par Andrew Optimus Goldheart —
Modification approuvée par Andrew Optimus Goldheart
- Avant
- Après
- Inchangé
Lignes de l'étape
[* icon_note] The logic board is still attached to the computer by one more cable, so don't lift the logic board too far out of the computer yet. |
[* black] Grasp the logic board at the left side and at the thin section, and rotate the logic board out of the lower case. |
[* icon_note] To properly reassemble your MacBook Pro, you'll have to clean off and replace the old thermal compound from the chips on the back of the logic board. Use our [guide|744|Applying Thermal Paste Guide] to prepare the processor and heat sink surfaces. |