Modifications apportées à l'étape #3
Modifié par Alex Giannousis —
Modification approuvée par Alex Giannousis
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* red] Using the 1.5 mm hex screwdriver, remove the four screws from the rear of the case. |
|---|---|
| + | [* orange] Also remove the screw on the bottom of the case. |
| + | [* icon_note] Again, recall which screws go where. The bottom screw and the top-right screw are both .15". The two bottom-right screws are both .4". ***The top-middle screw is .15" but has a different size thread and a blue mark. *** |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté