Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Aiden

Modification approuvée par Aiden

Avant
Après
Inchangé

Lignes de l'étape

[* red] Lets StartLet’s start by removing the red thing.
[* blackicon_note] You Can just takecan remove it out with your fingers.
[* green] Now pull out the PCB board.PCB. (It is best to pull by the Springssprings.)
[* red] Lets StartLet’s start by removing the red thing.
[* blackicon_note] You Can just takecan remove it out with your fingers.
[* green] Now pull out the PCB board.PCB. (It is best to pull by the Springssprings.)