Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par David Hodson

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* blackicon_note] Set the DVD drive on its side, with the two rubber grommets along the front of the drive facing you.
[* black
] Insert the end of the skinny screwdriver into the hole in the center of the firstlower rubber grommet along the front of the DVD drive housing.
[* black] Pull the rubber grommetscrewdriver straight towards the larger part of the openingup until the grommet is free.
[* black] Lift the tip of the screwdriver as you pull the grommet out to keep it from falling into the DVD drive housing.
[* blackicon_note] Set the DVD drive on its side, with the two rubber grommets along the front of the drive facing you.
[* black
] Insert the end of the skinny screwdriver into the hole in the center of the firstlower rubber grommet along the front of the DVD drive housing.
[* black] Pull the rubber grommetscrewdriver straight towards the larger part of the openingup until the grommet is free.
[* black] Lift the tip of the screwdriver as you pull the grommet out to keep it from falling into the DVD drive housing.