Modifications apportées à l'étape #4
Modifié par Mikinna Martin —
Modification approuvée par Mikinna Martin
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove the three 4mm screws holding down the heat sink. |
|---|---|
| - | [* orange] Remove the two 4mm screws holding down the metal bracket. |
| - | [* yellow] Unscrew the single 3mm screw securing the system board. |
| + | [* red] Remove the three 4mm screws with the Phillips #0 holding down the heat sink. |
| + | [* orange] Remove the two 4mm screws with the Phillips #0 holding down the metal bracket. |
| + | [* yellow] Unscrew the single 3mm screw using the Phillips #0 head securing the system board. |