Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #2

Modifié par Paul K

Modification approuvée par Adam O'Camb

Avant
Après
Inchangé

Lignes de l'étape

[* black] UseThe plastic frame is clipped inside the steel body with four clips, two each on the left and the right side of the watch, near the corners. You can stick a small screwdriver into the cutouts right above the clips and gently lever the plastic frame up, corner by corner.
[* black] Once the clips are released, use
a pair of tweezers to grab onto the black plastic frame and remove the internal hardware.
[* black] UseThe plastic frame is clipped inside the steel body with four clips, two each on the left and the right side of the watch, near the corners. You can stick a small screwdriver into the cutouts right above the clips and gently lever the plastic frame up, corner by corner.
[* black] Once the clips are released, use
a pair of tweezers to grab onto the black plastic frame and remove the internal hardware.
[* icon_note] Adhesive on the back side of the battery holds the internal components to the front case.
[* red] Use tweezers or a plastic opening tool to disconnect the ribbon cable from the motherboard.