Modifications apportées à l'étape #2
Modifié par Emily Walton —
Modification approuvée par Emily Walton
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* icon_note] ***Accessing RAM*** |
|---|---|
| - | [* black] ''Remove Casing'' |
| - | [* black] With J0 screwdriver bit loosen all the screws from the backing above the battery latch. |
| - | [* icon_reminder] If you have stripped screws follow ifixit stripped screw guide. |
| - | [* black] Remove the covering. |
| + | [* icon_note] ***Part 1: Removing Components *** |
| + | [* black] With J0 screwdriver bit loosen all screws from the backing above the battery latch. |
| + | [* black] Remove the covering. |
| + | [* black] Locate the three screws holding in the hard drive and unscrew them. |
| + | [* black] Slide the hard drive towards the left side of the computer to unplug it. |
| + | [* black] Pry the hard drive upwards and pull away from device. |
| + | [* black] Remove the RAM by gently pulling back the small clips along the side of each stick of RAM, and gently lifting the RAM upwards so the RAM is now angled. |
| + | [* black] Pull the RAM away from the device. |