Modifications apportées à l'étape #2
Modifié par Tyson Duerr —
Modification approuvée par Tyson Duerr
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* icon_note] ***Part 1: Removing Components *** | |
| [* black] With J0 screwdriver bit loosen all screws from the backing above the battery latch. | |
| [* black] Remove the covering. | |
| [* black] Locate the three screws holding in the hard drive and unscrew them. | |
| [* black] Slide the hard drive towards the left side of the computer to unplug it. | |
| [* black] Pry the hard drive upwards and pull away from device. | |
| - | [* black] Remove the RAM by gently pulling back the small clips along the side of each stick of RAM, and gently lifting the RAM upwards so the RAM is now angled. |
| - | [* black] Pull the RAM away from the device. |