Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #12

Modifié par Kyle Hall —

Modification approuvée par Kyle Hall

Avant
Après
Inchangé

Lignes de l'étape

[* icon_note] ***Removing Fan***
-[* red] Using the J0 screwdriver bit, remove two 7mm screws holding fan in place.
-[* orange] With tweezers, gently pull cable connecting fan to board.
-[* black] Gently tilt fan upwards and remove.
+ [* red] Using the J0 screwdriver bit, remove two 7mm screws holding fan in place.
+ [* orange] With tweezers, gently pull cable connecting fan to board.
+ [* black] Gently tilt fan upwards and remove.