Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par bushing

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Lift the left I/O frame up and out of the computer. Pay attention to the thin metal EMI fingers, as they may catch as you remove the left I/O frame.
-[* black] The speaker wire may be hooked onto the I?O frame. Lift it out of it's catch and don't forget to put it back when you are reversing the procedure.
-[* black] I couldn't take mine out because the shield is attached at the firewire port. I just lifted it out of the way and left it hanging there and went on my way
+[* icon_note] The speaker wire may be hooked onto the I/O frame. Lift it out of the catch and don't forget to put it back when you are reversing the procedure.
+[* icon_note] If the shield is soldered to the Firewire port, then just lift out out of the way before continuing.