Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Justin Cogan

Modification approuvée par Justin Cogan

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* black] ToFirst, begin by removing the printer's hood, openhood.
[* black] Open
the printer's mouth by simply pulling down on it; there are 2 mouth pieces that need to be pulled down.
[* black] Adjust the flap covering the scanner upward. When you are finished, the printer should appearupward, as shown.
[* black] ToFirst, begin by removing the printer's hood, openhood.
[* black] Open
the printer's mouth by simply pulling down on it; there are 2 mouth pieces that need to be pulled down.
[* black] Adjust the flap covering the scanner upward. When you are finished, the printer should appearupward, as shown.