Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Mary

Modification approuvée par Mary

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Place the metal spudger between the two plastic materials. Than, move the tool up and down, so that there a small gap in the middle.
+[* black] Place the metal spudger inside the gap where both plastic materials meet.
+[* black] Push the spudger inside the gap
+[* black] Once the spudger has been pushed inside the gap, you should then move the spudger up and down.