Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Justin Cogan

Modification approuvée par Justin Cogan

Avant
Après
Inchangé

Lignes de l'étape

-[* icon_caution] With the screw removed, separate the two pieces of the hood by lifting the top piece vertically as shown. ***Only lift the the top piece enough so that there is no tension applied to the ribbon cables shown.***
-[* black] The white ribbon cable is attached only to one piece of the hood, so simply pull it through(downward) the non-attached end as shown.
+[* red] With the screw removed, separate the two pieces of the hood by lifting it vertically.
+[* icon_caution] ***Only lift the the top piece enough so that there is no tension applied to the ribbon cables shown.***
+[* orange] Carefully pull down the white ribbon cable through the top piece of the hood.

Image 1

Ancienne version

Nouvelle version

Image 2

Ancienne version

Nouvelle version