Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Nathan Brady

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* icon_caution] With the screw removed, now separate the two pieces of the hood by lifting the top piece. ***Only lift the the top piece enough so that there is no tension applied to the ribbon cables shown.***
+[* icon_caution] With the screw removed, separate the two pieces of the hood by lifting the top piece. ***Only lift the the top piece enough so that there is no tension applied to the ribbon cables shown.***
[* black] The white ribbon cable is attached only to one piece of the hood, so simply pull it through the non-attached end as shown.