Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Joseph Camilleri

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* icon_caution] Have a second person lift the scanner as you lift the end of the hood attached to the scanner by a black ribbon cable. ***This cable can not be removed easily, do not try to remove it like you have with previous ribbon cables.***
+[* icon_caution] Have a second person lift the scanner as you lift the end of the hood attached to the scanner by a black ribbon cable. ***This cable cannot be removed easily, do not to remove it.***
[* black] Set the piece of the hood down such that no stress is applied to the scanner as it is attached by ribbon cable.
-[* black] The printer hood should now be in 2 pieces.
+[* icon_note] The printer hood should now be in 2 pieces.