Modifications apportées à l'étape #4
Modifié par rcr —
- Avant
- Après
- Inchangé
Lignes de l'étape
[* black] Carefully pull out the fan. | |
- | [* |
+ | [* icon_note] Note: replacing the fan is highly reccomended |
[* black] Optionally you may clean the fan with Air + Q-Tips. To remove the blade turn the fan over and gently pull the fan blade from the housing. | |
- | [* |
- | [* |
+ | [* icon_caution] If the fan is no longer operational, it may be possible to temporarily repair it by removing the fan blade and put a small amount of WD-40 on the pinion shaft hole the fan rotates in. A toothpick is a good applicator. Do NOT contaminate the motor area with any of the dust/grime that has accumulated. |
+ | [* icon_reminder] Insert the fan blade and move the blades with your finger. It should spin freely and cog to a stop. Again this is a temporary fix! |