Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par hello

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Remove all of the screws that hold the back plate in placeplace.
[* red] Unscrew the 4mm screw that is directly to the right of the viewfinderviewfinder.
[* black] On the basebase,
[* red] Unscrew the 3mm screw in the top left cornercorner.
[* orange] Unscrew all four 3mm screws under the battery covercover.
[* green] Unscrew the 3mm screw on the right side panelpanel.
[* black] Unscrew the two 2mm screws on the left side panelpanel.
[* icon_note] The bullets apply to the three pictures on the stepstep.
[* black] Remove all of the screws that hold the back plate in placeplace.
[* red] Unscrew the 4mm screw that is directly to the right of the viewfinderviewfinder.
[* black] On the basebase,
[* red] Unscrew the 3mm screw in the top left cornercorner.
[* orange] Unscrew all four 3mm screws under the battery covercover.
[* green] Unscrew the 3mm screw on the right side panelpanel.
[* black] Unscrew the two 2mm screws on the left side panelpanel.
[* icon_note] The bullets apply to the three pictures on the stepstep.