Aller au contenu principal

Fix Your Stuff

Right to Repair

Parts & Tools

Modifications apportées à l'étape #4

Modifié par Mason Morgan

Validation en attente

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* blue] Loosen the ribbon cables from the board.
[* blue] 1-Directly below the viewfinder
[* blue] 2-At the Base of the board
[* bluegreen] 3-At the top right near the selector wheel. 1 on top of the board 2 on the underside.
[* blueyellow] 1-The center of the board, above the central hole
[* red] With metal tweezers, remove the two white plastic clips from their sockets one on the base of the board and the other on the surface.
[* bluegreen] 3-At the top right near the selector wheel. 1 on top of the board 2 on the underside.
[* blueyellow] 1-The center of the board, above the central hole
[* red] With metal tweezers, remove the two white plastic clips from their sockets one on the base of the board and the other on the surface.
[* icon_note] The bullets apply to the three pictures on the step

Image 1

Ancienne version

Nouvelle version