Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Matthew Newsom

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* blackred] Remove the two Phillips screws from the bottom right of the logic board.
[* icon_note] Do not lift the logic board out without disconnecting the DC-In connector underneath
the logic board.
[* blackred] Remove the two Phillips screws from the bottom right of the logic board.
[* icon_note] Do not lift the logic board out without disconnecting the DC-In connector underneath
the logic board.