Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #4

Modifié par Jay Sterner

Modification approuvée par Jay Sterner

Avant
Après
Inchangé

Lignes de l'étape

[* icon_caution] Do not pull hard when removing the backing because it could rip the orange strip attached to the motherboard.
[* black] Gently pull off the back of of the camera from the left side so that it is partially open.
[* black] Gently pull off the back of of the camera from the left side so that it is partially open.
[* red] Use a spudger to lift up the tab holding the orange strip and slide the strip out to disconnect it
[* icon_note] Refer to the next step to see how to properly use the spudger when removing a strip.