Historique de l'étape n° 22 de Canon PowerShot G1 X Mark II Motherboard Replacement

Modifications apportées à l'étape #22

Modifié par Chandler Mang — 1 mars 2016

Modification approuvée par Chandler Mang

-	[* red] Use the plastic spudger to remove the ribbon cable from the motherboard.
+	[* red] Use the plastic spudger to remove the ribbon cable from the motherboard by placing the spudger under the ribbon cable connector and pulling up.
	[* orange] Remove the 2.8mm screw from the motherboard.
+	[* icon_caution] Do not try to remove the motherboard from the camera yet.
	[* black] Carefully rotate the motherboard upward.
	[* yellow] Use the plastic spudger to remove the ribbon cable from the bottom of the motherboard.