Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Chris

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Flip over the motherboard.logic board
[* black] Near the middle of the motherboardlogic board on the left side resides a final screw. This screw while alsowill require a smaller hex screw is smallerbit than the previous screws so a smaller bit must bepreviously used.
[* black] Remove the screw and the metal castingcasing covering the track pad can now be removed.
[* black] Remove the clip holding the track pad in and then remove the track pad from the motherboardlogic board.
[* black] Flip over the motherboard.logic board
[* black] Near the middle of the motherboardlogic board on the left side resides a final screw. This screw while alsowill require a smaller hex screw is smallerbit than the previous screws so a smaller bit must bepreviously used.
[* black] Remove the screw and the metal castingcasing covering the track pad can now be removed.
[* black] Remove the clip holding the track pad in and then remove the track pad from the motherboardlogic board.