Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Michael Labdon

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Flip over the logic board
[* black] Near theThere is another torx screw near the middle of the logic board on the left side resides a final screw. This screw will require a smaller hex screw bit than previously usedside.
[* black] Near theThere is another torx screw near the middle of the logic board on the left side resides a final screw. This screw will require a smaller hex screw bit than previously usedside.
[* black] Remove the screw and the metal casing covering the track pad can now be removed.
[* black] Remove the clip holding the track pad in and then remove the track pad from the logic board.