Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par David Hodson

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Insert the flat end of a spudger between the SD card slotboard and the motherboard.
[* black] Run the spudger along the sides of the SD card slotboard to free it from the adhesive pad holding it in place.
[* black] Once completely freed, lift the SD card slotboard straight off the motherboard.
[* black] Insert the flat end of a spudger between the SD card slotboard and the motherboard.
[* black] Run the spudger along the sides of the SD card slotboard to free it from the adhesive pad holding it in place.
[* black] Once completely freed, lift the SD card slotboard straight off the motherboard.