Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Jan Christoph Borchardt

Modification rejetée par Jake Devincenzi

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] After removing a coupleRemove the 3 exposed Phillips screwsscrews.
[* black] Then remove the feet with a plastic opening tool (they will stick back on later)
and searching for moreremove those 4 Phillips screws under the feet, aas well.
[* black] A
plastic opening tool makes short work of the retaining clips securing the bottom panel. There are 4 clips on the inside that you can loosen by moving the bottom panel around a bit.
[* black] After removing a coupleRemove the 3 exposed Phillips screwsscrews.
[* black] Then remove the feet with a plastic opening tool (they will stick back on later)
and searching for moreremove those 4 Phillips screws under the feet, aas well.
[* black] A
plastic opening tool makes short work of the retaining clips securing the bottom panel. There are 4 clips on the inside that you can loosen by moving the bottom panel around a bit.
[* black] With the bottom panel gone, we finally get a good look at the guts of the beast.