Modifications apportées à l'étape #2
Modifié par Nicholas Pfingsten —
Modification approuvée par Nicholas Pfingsten
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Remove the lens housing by pushing it, from the front, through the housing and lifting it out. | |
| - | [* red] Gently pull on the large ribbon wire (connecting the Lens housing to the motherboard) with the tweezers. |
| + | [* red] Gently pull on the large ribbon wire (connecting the Lens housing to the motherboard via ZIF connector) with the tweezers. |
| [* light_blue] Gently pull on the small ribbon wire (connecting the Lens housing to the motherboard) with the tweezers. | |
| [* icon_caution] Be careful not to damage either of the ribbon wires. |