Modifications apportées à l'étape #1
Modifié par Edward Pacheco —
Modification approuvée par Edward Pacheco
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] remove the palm rest |
|---|---|
| + | [* black] remove the power adapter port |
| + | [* black] Close the display and turn the computer over. 2 Disconnect the antenna cables from the wireless card. 76 3 Remove the antenna cables from the routing guide on the computer base. . |
| + | [* black] 1 routing guide 2 antenna cables (2) 4 Turn the computer over and open the display as far as possible. 5 Remove the antenna cables from the slot on the computer base. 6 Peel off the tape that secures the display cable to the system board 7 Lift the connector latch and disconnect the display cable from the system board. |
| + | [* black] 1 display cable 2 tape 3 connector latch 8 Remove the screws that secure the display hinges to the computer base. 9 Note the antenna cable routing and remove the cable from the routing guides on the computer base. 78 10 Release the display hinges from the tabs on the computer base and lift the display assembly off the computer base |