Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #2

Modifié par David Hodson

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* icon_caution] Read before continuing (photo courtesy of [http://www.flickr.com/photos/katerha/4526272937/|katerha]).
[* icon_note] There are two different methods for removing the brake drum on the Focus. One removes both the drum and the rear wheel bearing, and one removes just the drum. If you are replacing the brake drums, then follow the appropriate directions for your part: with or without the bearing installed. If you are not replacing the drums, keep in mind that the rear wheel hub bolt that holds the bearing in place must be torqued to 175 ft-lbs.

Image 1

Aucune image précédente

Ajouté