Modifications apportées à l'étape #17
Modifié par David Hodson —
- Avant
- Après
- Inchangé
Lignes de l'étape
[* black] If you removed the wheel bearing with the brake drum, replace the rear hub nut. |
[* icon_note] Torque this nut to 175 ft-lbs. Failure to properly tighten this nut could lead to premature wheel bearing failure. |
[* black] Replace the dust cap. |
[* black] If you removed the brake drum by itself, reinstall the four retaining bolts on the back of the hub assembly. |
[* icon_note] Torque each bolt to [I have to look this up] ft-lbs. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté