Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Jaimie Payne

Modification approuvée par Jaimie Payne

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Metal spudger is recommended in this step.
-[* black] Use the metal spudger pick the unit board out.
-[* black] the unit board is glued on the device shown on photo 3
+[* black] Using the metal spudger, with the pointed tip, pry the unit board off the case
+ [* icon_caution] Be careful when using the metal spudger as it can damage your device. A strong adhesive is used to secure the unit board to the case and may require a significant amount of pressure to remove.