Modifications apportées à l'étape #2
Modifié par Jonathan yousaf —
Modification approuvée par Jonathan yousaf
- Avant
- Après
- Inchangé
Lignes de l'étape
+ | [* black] Begin by soldering the connector wires off the metal plate at the bottom of the speaker. |
---|---|
+ | [* black] Be sure to note where each wire will be resoldered when you have your new speaker in place. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté
Image 3
Aucune image précédente
Ajouté