Aller au contenu principal

Modifications apportées à l'étape #11

Modifié par Walter Galan

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

+[* black] Push the upper case slightly toward the display assembly, then rotate it away from the front of the display assembly.
+[* black] Once the two display hinges have cleared the upper case, remove the display and set it aside.
+[* icon_reminder] Keep track of the shims under each of the two display brackets. When installing the display, be sure a shim is installed under each display bracket (against the upper case) as shown in the third picture.