Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par Andrew Bookholt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

+[* black] Disconnect the hard drive cable from the hard drive using a spudger to gently loosen one side at a time. (Be careful not to pry to hard or you may bend the pins.) You may need to remove a piece of orange tape attaching the ribbon cable to the hard drive.
+[* icon_note] This is a bit tricky. If you bend the pins, do your best to straighten them using the hard drive cable as a guide.

Image 1

Aucune image précédente

Ajouté