Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Jeff Suovanen

Modification approuvée par Jeff Suovanen

Avant
Après
Inchangé

Lignes de l'étape

-[* icon_note] When replacing your AirPort card, it may be helpful to use curved tweezers to angle the card upward and insert it into the AirPort slot.
-[* black] With the tweezers pointed downwards, insert the points of the tweezers through the screw holes next to the antenna cable sockets.
-[* black] Press down on the AirPort card to angle it upwards such that the card is parallel to the logic board.
-[* black] Align the AirPort card with it's slot on the logic board, and press the card into the slot until the screw holes nearest the connector align with those in the logic board.
+[* icon_reminder] During reassembly, if installing the AirPort card proves challenging, you can use curved tweezers to help orient the card and insert it into its slot on the back of the logic board.
+ [* black] With the tweezers pointed downwards, insert the points of the tweezers through the screw holes in the AirPort card, next to its antenna cable sockets.
+ [* black] Using your finger, press down on the edge of the AirPort card to angle it until it is roughly parallel to the logic board.
+ [* black] Align the AirPort card with its slot on the logic board, and press the card into the slot until the screw holes nearest the connector align with those in the logic board.
+[* icon_note] For reference, the third photo shows the logic board removed and flipped over for a clear view of how the AirPort card is installed.

Image 3

Aucune image précédente

Ajouté