Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Evan Noronha

Modification approuvée par Evan Noronha

Avant
Après
Inchangé

Lignes de l'étape

[* icon_note] When replacing your AirPort card, it may be helpful to use curved tweezers to angle the card upward and insert it into the AirPort slot.
[* black] With the tweezers pointed downwards, insert the points of the tweezers through the screw holes next to the antenna cable sockets.
[* black] Press down on the AirPort card to angle it upwards such that the card is parallel to the logic board.
-[* black] Align the AirPort card with it's slot on the logic board, and insert the card into the slot.
+[* black] Align the AirPort card with it's slot on the logic board, and press the card into the slot until the screw holes nearest the connector align with those in the logic board.