Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #2

Modifié par Darcy Patko —

Modification approuvée par Scott Havard

Avant
Après
Inchangé

Lignes de l'étape

-[* red] You will see that the plastic connection is connected to the main handle's framework by a 7/16" bolt and nut.
+[* red] The throttle assembly is attached to the push bar with a 7/16" bolt and nut.
[* black] Using a 3/8" drive rachet wrench with a 7/16" socket and a 7/16" combination wrench, remove the nut.
[* black] Pull the plastic cable connection away from the framework.