Modifications apportées à l'étape #5
Modifié par Darcy Patko —
Modification approuvée par Scott Havard
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Locate the plastic fitting hooked |
|---|---|
| + | [* red] Locate the plastic fitting hooked to the steel housing of the engine. |
| [* black] To the left of the fitting, you will see a steel sliding mechanism connected by a spring. | |
| [* black] Squeeze the mechanism together to allow for slack in the cable wire. | |
| [* icon_note] You might need to use pliers or clamps in order to squeeze the plates together. |