Modifications apportées à l'étape #14
Modifié par Philip Le Riche —
Modification approuvée par Philip Le Riche
- Avant
- Après
- Inchangé
Lignes de l'étape
[* black] [* icon_caution] Hold the fan vanes still while you apply the vacuum cleaner as there is a theoretical possibility that if you spin the fan too fast it could generate a high enough voltage to damage the motherboard. [* icon_caution] Do not remove the heat sink from the processor and support chips unless you have to. If you do, it's essential that you clean off and replace the heat sink paste in the proper fashion as otherwise the processor is very likely to overheat. [* black] The backup battery is just behind the RAM sockets on a pair of flying leads. Remove the modem module (just above it in the photo - retained by a single screw) in order to unplug it. [* icon_note] Unplugging the backup battery does not reset the BIOS or wipe a BIOS password as it's only used to keep the |
[* black] [* icon_caution] Hold the fan vanes still while you apply the vacuum cleaner as there is a theoretical possibility that if you spin the fan too fast it could generate a high enough voltage to damage the motherboard. [* icon_caution] Do not remove the heat sink from the processor and support chips unless you have to. If you do, it's essential that you clean off and replace the heat sink paste in the proper fashion as otherwise the processor is very likely to overheat. [* black] The backup battery is just behind the RAM sockets on a pair of flying leads. Remove the modem module (just above it in the photo - retained by a single screw) in order to unplug it. [* icon_note] Unplugging the backup battery does not reset the BIOS or wipe a BIOS password as it's only used to keep the |
Image 2
Supprimé