Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Jake Devincenzi

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Place a jack underneath the frame near the passenger side front wheel.
[* black] Raise the car with the jack until you can work comfortably under the car.
[* black] Place a jack stand on the frame immediately behind the jack.
[* black] Slowly lower the jack until the car is resting on the jack stand and remove the jack.
[* icon_note] Most hydraulic jacks are lowered by placeplacing the end of the handle over a knob and turning it counterclockwise. Consult your owner's manual if you don't know how to lower your jack.
[* icon_note] Most hydraulic jacks are lowered by placeplacing the end of the handle over a knob and turning it counterclockwise. Consult your owner's manual if you don't know how to lower your jack.
[* icon_caution] '''Never''' work underneath a car that is only supported by a jack. It may slip or fail, resulting in serious injury or death.

Image 1

Ancienne version

Nouvelle version

Image 2

Ancienne version

Nouvelle version

Image 3

Ancienne version

Nouvelle version