Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #9

Modifié par Phillip Takahashi

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Place the new filter onto the engine's oil filter threads, being careful not to get dirt and debris on the wet oil filter gasket.
[* black] Turn the oil filter clockwise by hand until it is snug. Tightening should require a moderate amount of your strength, but not all of it.
[* icon_caution] If the filter is difficult to turn at the beginning of its threads, stop! You may be cross threading the oil filter. Re-align the oil filter and try again.
[* icon_caution] Do not over-tighten your oil filter by using a wrench. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future.
[* black] Remove the oil drain pan from under the car.

Image 1

Aucune image précédente

Ajouté

Image 2

Aucune image précédente

Ajouté

Image 3

Aucune image précédente

Ajouté